Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios (25, 50, 100 and 200) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350°C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5 (25) exhibited the highest selectivity to N₂, exceeding 90% at 350°C. These samples were investigated in detail by several characterizations to illuminate the dependence of the catalytic performance on redox properties, Cu species, and acidity. The characterization results proved that the redox properties and chemisorption oxygen primarily affect n-butylamine conversion. N₂ selectivity was impacted by the Brønsted acidity and the isolated Cu²⁺ species. Meanwhile, the surface acid sites over Cu-ZSM-5 catalysts could influence the formation of Cu species. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra was adopted to explore the reaction mechanism. The Cu-ZSM-5 catalysts are the most prospective catalysts for nitrogen-containing volatile organic compounds removal, and the results in this study could provide new insights into catalysts design for VOC catalytic oxidation.     

氮掺杂二氧化钛负载钒磷氧催化氧化NO的实验研究

以VPO为活性组分,N掺杂TiO 2为载体,采用浸渍法制备了VPO/TiN催化剂,基于单因素实验研究了其对NO的选择性催化氧化(SCO)性能以及抗硫抗水性能。研究表明:当P/V为1/5、N/Ti为1、活性组分负载量为10%、焙烧温度为350℃时,催化剂的SCO活性最好,NO氧化率达到61%;光致发光光谱(PL)表征显示N掺杂TiO 2在催化剂表面形成的氧空位可增强催化剂对O 2的吸附;VPO/TiN催化剂抗硫抗水性能较强,反应后的催化剂表面未发现硫酸根的特征峰,水蒸气主要通过与NO竞争吸附占据活性位点来抑制催化剂的SCO活性。     

Fetal exsanguination following intrauterine angiographic assessment and selective termination of a hydrocephalic,monozygotic co-twin

Selective termination by intracardiac potassium chloride injection was performed in twins discordant for hydrocephaly at 20 weeks' gestation. Because of the potential for vascular anastomoses to exist between the twins, fetal angiography was performed prior to the selective termination procedure. Determination of vascular connections between the fetuses was hindered by fetal bradycardia following intracardiac administration of contrast material. Selective termination was performed without difficulty using intracardiac potassium chloride (KCl) to produce asystole in the twin with hydrocephaly. The unaffected fetus appeared active and had a normal heart rate during and immediately after the procedure. However, both twins were found to have died the following day. Pathologic examination documented several vascular anastomoses between the monochorionic, diamniotic fetuses. A likely cause of death was exsanguination of the normal twin into the abnormal one. This case illustrates the difficulties encountered in selective termination of monozygotic twins and, to our knowledge, represents the first reported use of intrauterine fetal angiography.     

A survey of diagnostic amniocenteses in Oxford from 1974–1981

A survey was conducted of the results of mid-trimester diagnostic amniocenteses in the Oxford Region from 1974 to 1981. The survey used data relating to all 4357 singleton pregnancies in which an amniocentesis was performed during this period. Follow-up information on outcome was obtained in respect of 4284 (98 per cent) pregnancies. A cell culture to determine karyotype and an alpha-fetoprotein determination was carried out in all cases. From 1974 to 1981 amniocenteses became increasingly common, rising from 2 to 32 per 1000 births. The most common indication for amniocentesis was a high risk of a chromosome abnormality–56 per cent of all amniocenteses. Within this group advanced maternal age was responsible for 89 per cent of the cases. The next most common indication was a high risk of a neural tube defect (37 per cent of all amniocenteses)–in 1974 a raised maternal serum alpha-fetoprotein level accounted for only 4 per cent of these; by 1981 this had risen to 67 per cent. There were seven false-positive and 132 true-positive diagnoses of neural tube defect; since 1981, with the introduction of amniotic fluid acetylocholinesterase determination as a secondary diagnostic test for neural tube defects, there have been no further false-positive diagnoses. In 1981 76 per cent of women aged 35 years or more did not have an amniocentesis. It is not known to what extent this was due to not offering women in this age group amniocentesis or to women not accepting such an offer.     

Selective survival of only the healthy fetus following prenatal diagnosis of thalassaemia major in binovular twin gestation

Selective feticide is the procedure of choice when, in twin binovular pregnancy, only one of the fetuses is shown to be affected. As the probabilities for this condition are almost 1:2 when the genetic disease is due to homozygosity for two autosomal recessive genes, the problem is expected to occur frequently among the ever increasing number of couples seeking prenatal diagnosis of thalassaemia and the haemoglobinopathies. The present report is the first case of this condition and the ninth in the overall medical literature.     

Experimental and theoretical studies on NO selective catalytic oxidation over α-MnO2

Based on the experimental and theoretical methods, the NO selective catalytic oxidation process was proposed. The experimental results indicated that lattice oxygen was the active site for NO oxide over the $\mathrm{\alpha }$-MnO₂(110) surface. In the theoretical study, DFT (density functional theory) and periodic slab modeling were performed on an $\mathrm{\alpha }$-MnO₂(110) surface, and two possible NO oxidation mechanisms over the surface were proposed. The non-defect $\mathrm{\alpha }$-MnO₂(110) surface showed the highest stability, and the surface O_s (the second layer oxygen atoms) position was the most active and stable site. O₂ molecule enhanced the joint adsorption process of two NO molecules. The reaction process, including O₂ dissociation and O=N-O-O-N=O formation, was calculated to carry out the NO catalytic oxidation mechanism over $\mathrm{\alpha }$-MnO₂(110). The results showed that NO oxidation over the $\mathrm{\alpha }$-MnO₂(110) surface exhibited the greatest possibility following the route of O=N-O-O-N=O formation. Meanwhile, the formation of O=N-O-O-N=O was the rate-determining step.     

Selective collection as a pretreatment for indirect solid recovered fuel generation

Effective selective collection (SC) has been increasing in many countries of the European Union. As a consequence the composition of residual municipal solid waste (RMSW) is changing not only because of economic development, but also due to the collection system. The input of RMSW treatment plants is thus not homogeneous. This paper analyses two case studies involving a total of five SC scenarios and their impact on the generation of solid recovered fuel (SRF) with/without bio-drying, post-treatment and packaging take back programs (TBPs). These case studies are based on two types of SC: kerbside and drop-off. The latest regulation on SRF classification is taken into account: energy content, Cl and Hg concentrations are assessed and discussed. The role of the respirometric index (RI) is also analyzed. Results show that when SC is highly efficient RMSW can be classified directly as SRF, but only if the introduction of RI does not set stringent respirometric targets. The role of packaging TBPs is important as the residual waste remaining after the packaging has been processed, can be valorized increasing the lower heating value (LHV) of the residual RMSW and minimizing the streams that should be landfilled. The source separation of food waste has a significant impact on the suitability of bio-drying: when the SC of food waste is very efficient, its percentage in the RMSW may be too low for effective bio-drying.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

Influence of fertilizing on the Cs soil–plant transfer in a spruce forest of Southern Germany

Fertilization with 2.5 t/ha limestone: (83% CaCO₃, 8% MgO, 6% K₂O, 3% P₂O₅) reduces the ¹³⁷Cs transfer from spruce forest soil into plants like fern (Dryopteris carthusiana) and blackberry (Rubus fruticosus) by a factor of 2–5 during at least 11 years as measured by the aggregated transfer factor T_ag. In 1997 and 2006 these results were confirmed by additional measurements of the ¹³⁷Cs transfer factor TF, related to the root zone (O_h horizon), which were explained by the selective sorption of ¹³⁷Cs in the root zone by measurements of the Radiocaesium Interception Potential (RIP) in fertilized (RIP > 179 meq/kg) and non-fertilized soils (RIP < 74 meq/kg).